ZH-983F2 1 Pair For ATV Motorcycle Intelligent 3 Gears Temperature Adjustable Heated Grips Winter Warmer Electric Heating Hand Grips

• The product adopts an integrated molding design to prevent rainwater and dust from entering the internal corrosion parts, making the service life longer and safer
• The product switch is equipped with an intelligent temperature control chip, which can be adjusted at three levels. The temperature can be adjusted at will according to your own needs. The intelligent temperature control is safer
• The product has 12V input voltage and 22mm general inner diameter of handle, which is suitable for most ATVs without accelerator
• The handlebar of the product is designed to be sealed and open, which does not affect the installation of decorative accessories such as handlebar plug outside the handlebar, making it more beautiful and convenient to use
• The product has added a standby mode. After switching to the standby mode, the electric heating handle will automatically keep constant temperature to about 50℃, which is more convenient for your use
• The product line is equipped with 5A fuse and waterproof cover, which can automatically cut off the power supply when the car has problems, effectively preventing dangerous accidents

Specifications:

• Product model: ZH-983F2
• Product net weight: 252G
• Product material: nitrile
• Suitable handle diameter: 22mm
• Input voltage: DC12V
• Product power: red light 35W, blue light 25W, green light 17W
• Handle temperature: low 40 ℃, medium 50 ℃, high 60 ℃
• Switch type: aluminum alloy multi gear adjustable temperature control switch
• Handle size: 12.7cm
• Applicable model: 12V ATV with handle diameter of 22mm

Operating instructions:

• Power on: red light, blue light and green light flash once respectively and then go out
• Working status: indicator light is always on (high gear: red light is always on, middle gear: blue light is always on, low gear: green light is always on)
• Long press the ON key for 3 seconds: enter the standby mode or shut down
• Click on the key: shift gears
• How to use the switch: press and hold for 3 seconds to start the machine, and the red breathing light will turn on and enter the standby state. When the temperature reaches a certain value, it will automatically turn into the blue middle gear; Press it to change to a blue light, and the temperature is medium; Press twice to turn green, and the temperature is the lowest; Press three times to turn red, which means the third gear high temperature; Press and hold for 3 seconds to shut down

Installation instructions:

• 1. First remove the original handlebar tools, and then clean the handlebars.
• 2. Then wet the inner holes of the left and right handlebars of the product with soapy water, and install the left and right handlebars on the handlebars respectively. The twisting range cannot be too large during installation.
• 3. When connecting the power cord, the red wire of the product is connected to the positive pole of the vehicle power supply, and the black wire is connected to the negative pole of the vehicle power supply. After confirming the positive and negative poles, connect them again, and do not connect them reversely.
• 4. Because the switch of this product has two fixing methods (rearview mirror fixing and glue fixing), the aluminum alloy switch can be fixed to the iron bracket with small screws, and then the iron bracket can be fixed to the rearview mirror base and tightened; Or directly stick the film to the back of the aluminum alloy switch, and then stick the tape to a suitable position on the car to fix it.
• Note: When installing the handle, do not twist the handle too much, as excessive twisting will cause displacement of the heating wire.

Wiring method:

• 1. The positive and negative electrodes of the battery, the red wire is connected to the positive electrode of the battery [+], and the black wire is connected to the negative electrode of the battery [-].
• 2. At the positive and negative pole positions of the ignition switch, the red wire is connected to the positive output wire of the ignition switch, and the black wire is connected to the battery negative pole [-] or ground.
• Note: when wiring, red is connected to the positive pole and black is connected to the negative pole. If the connection is reversed, the switch will burn off, but the handle will heat up, so when wiring, please make sure that the positive and negative terminals are connected again to prevent burning off.