WUPP CSZH-1314A1 12V Strap-Style Heated Grips for Motorcycle Fast Heating Grips

• WUPP CSZH-1314A1 12V Strap-Style Heated Grips offer enhanced safety with reverse polarity protection and surge protection
• Crafted from pure PVC rubber fabric, these grips are not only waterproof but also highly durable, resistant to wear, tear, folding, aging, and alkali
• Featuring a built-in smart temperature control chip, these grips offer five adjustable temperature levels for precise and convenient temperature regulation
• With a rapid 10-second heating capability and a large heating area, they ensure quick and effective warmth
• The strap-fixed heating elements provide easy and non-damaging attachment to your handlebars. Additionally, it boasts an IP67 waterproof rating. Cleaning is a breeze-simply unplug and wash for utmost convenience

Specifications:

• Product Model: CSZH-1314A1
• Product Weight: 210g
• Input Voltage: DC 12V
• Operating Voltage: DC 12.2V (This product includes under-voltage protection; it will not function if the voltage drops below 12.2V)
• Heating Element and Strap Dimensions: Length 10.5cm, Width 9.5cm, Strap Length 64cm
• Cable Length: 9cm (Heating element connection), 104cm (Heating element to switch), 150cm (Switch to terminal) (For reference only)
• Operating Temperature: -30℃ to +100℃
• Product Power and Temperature Control Values: Level 1 (Red): 18W/85℃; Level 2 (Orange): 14W/75℃; Level 3 (Yellow): 10W/60℃; Level 4 (Green): 8W/55℃; Level 5 (Blue): 6W/50℃ (For reference only)
• Fuse: 5A
• Materials: Fabric: Pure PVC Rubber, Strap: Polypropylene, Heating Element: Composite Fiber Heating Wire
• Installation Method: Adhesive Attachment, L-Bracket Mirror Mounting

Wiring Method:

• Red wire connects to the positive terminal of the battery, black wire connects to the negative terminal of the battery.
• For vehicles with an SAE plug, you can directly connect the SAE plug on the wires to the vehicle's SAE plug for use.

Operating Instructions:

• If VIN < 11.7V, the device will not turn on; If VIN < 12.2V, the LED light will flash for 5 seconds (1Hz 50%) and then turn off.
• Working Status: Indicator light stays on (Level 1: Red light stays on, Level 2: Orange light stays on, Level 3: Yellow light stays on, Level 4: Green light stays on, Level 5: Blue light stays on).
• Single-click the power button to switch between temperature levels.

Special Attention:

• Please select the appropriate temperature level based on the ambient temperature. In cold conditions, to avoid burns from high temperatures when your hands are numb, start with a lower or medium level.
• This product is only suitable for motorcycles with a 12V battery. Before installation, confirm your vehicle's voltage and carefully review the installation diagram, as incorrect voltage and wiring can damage the components.
• This product can only be installed on motorcycle handlebars for powered use. You can test the product's power supply with the battery before installation.
• Do not power it on when not riding (idle) to prevent the heated grips from overheating and damaging the original handlebars.
• For wiring, it is recommended to connect to the ignition lock wire. In most models, the black wire is the positive pole, and the green wire is the negative pole. It is advisable to use a multimeter to measure the specific situation.