• Adopting simple modification, that is, no damage to the appearance, but also easy to operate, very easy to install
• Adopting PET metal heating piece, the heating speed is very fast, a few seconds quick heat, safe and fast
• Adopting three adjustable switches, you can adjust the high and low temperature according to your own needs, the design is very humanized
• Switch design can be directly installed to the rearview mirror seat, there is no need to punch holes, no need to destroy, very simple
• DC 12V input, suitable for all motorcycles, very wide range of use
• The new handlebar electric heaters use little electricity, with a switch
• No longer need to worry about cold hands when riding in winter

Installation Method:

• 1. Put the heating pad on the handlebar, and adjust it to the right position
• 2. Use the tape to fix (wrap) the heating pad evenly to the handlebar, especially the wiring of the heating pad should be tightly wound
• 3. Put on the sleeve, and adjust the position, with a hot air gun (you can also use a lighter or hair dryer) longitudinally symmetrical blowing the two creases of the outer casing until the contraction of uniformity, and then blow the other parts of the uniform until the outer casing of the parts of the contraction of uniformity, leveling until
• 4. The switch is installed in the rearview mirror under the mirror rod
• 5. Connect the power cord, The red line, and black line do not distinguish between positive and negative poles, but must be connected to the electric door lock (insert the key place) the lower pole output line

Specifications:

• Product Model: CS-054B1
• Product weight: 84g
• Material: PET metal heating pad
• Suitable for: 12V motorbike
• Heating area: 90 x 85mm
• Product power: 10W (one side of the power) two sides are 20W
• Handle temperature: low temperature: 30 ℃; high temperature 50 ℃-60 ℃ (for reference only)
• Switch type: three adjustable switch
• Applicable models: 12V all motorcycle models