• The sensor interface is changed to RJ11 to solve the problem that the device restarts when the sensor is powered on and plugged in (supports hot plugging)
• Support automatic mode under LAN
• Add switch and reversal as the executive action of the scene; support as trigger and execution action at the same time
• Support jog open
• Add the protective cover, DIN rail, double-click key switch automatic control, and an automatic control indicator

Specifications:

• Control mode: manual control; automatic control
• Temperature and humidity display: the value retains one decimal place; the temperature and humidity history can be viewed in the APP for up to 6 months of historical temperature and humidity data
• Timer: 20 timers can be added, 8 timers can be enabled (the sum of timing, delay, and cycle timing), and only one cycle timing can be set; timing, delay, and cycle timing
• Power-on response: the state of the channel when the device is powered on again after the device is powered off
• Jog setting: the device automatically turns off after turning on for a specified time
• Temperature unit: °F, °C
• Local area network control: The control method in which the APP communicates directly with the device by connecting to the same router instead of the cloud platform