• Suitable for automobile tires, cars, off-road vehicles, small trucks, commercial vehicles, trucks under 2 tons, cars and other larger tires, with large air volume and fast inflation
• It is also suitable for motorcycles, bicycles, ball games, rubber boats, beach floating beds, inflatable toys and so on
• When going to work on the expressway, in the wild or in the morning, the tire suddenly leaks or has an injection, which can give full play to the first aid
• Maintaining the correct tire pressure of automobile tires can ensure driving safety and save gasoline, which can be used with the vehicle, just in case, and has infinite wonderful use
• It is equipped with a complete set of inflatable nozzles, which can be used to inflate tires, rubber boats, air cushions, inflatable toys, ball games and other purposes

Usage:

• 1. Insert the air nozzle at the top of the rubber tube directly into the tire valve. When you hear the sound of air leaking from the tire, it means that the air has circulated. Continue to tighten the air nozzle, and the air will no longer leak out at this time.
• 2. Connect the power access correctly.
• 3. When inflating, the instrument pointer rises with the tire saturation degree. When the pointer reaches the appropriate tire pressure (the tire pressure of ordinary car tires is 223kpa=35PSI), take out the plug and air nozzle to complete the work.
• 4. Please use the professional ball needle and plastic nozzle equipped with this machine to connect with the air nozzle to inflate the balls and other air-requiring equipment.

Note:

• 1. Water is strictly prohibited for products;
• 2. Children are forbidden to touch at work;
• 3. This machine is limited to (DC12V) power supply;
• 4. When inflating, please stop the machine for cooling for 10 minutes after continuous work for 10 minutes, so as to prevent damage to the air pump and accessories and prolong the service life of the motor;
• 5. When the general tire is inflated, it can reach the normal tire pressure of 30PSI in about 3-5 minutes, while the large tire will take a little longer; If the pointer of the instrument rises to 50-100PSI at the beginning of inflation, it means that the air is blocked and the air does not enter the tire. At this time, it is necessary to pull off the air nozzle connector immediately and re-operate, otherwise the motor and instrument will be easily damaged;
• 6. Don't leave the body when using it, pay attention to the tire pressure at any time, and don't be too saturated;
• 7. After the machine is used, the air nozzle wrench must be straightened to avoid rubber elasticity fatigue inside;
• 8. The plug of this air pump is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 15A);
• 9. This machine should avoid damp, heavy fall and sand and mud invasion, and avoid children playing with it, so as not to be damaged;
• 10. The pressure required for each type of tire is different. Please refer to the signs on the side of the automobile tire or ask the automobile manufacturer.