• The water stopper keeps water inside the threshold to prevent water overflow

• Made of premium PET plastic material, not afraid of cold or heat, durable to use

• Soft and flexible, you can cut it to the length and create all sorts of shapes you need

• Ideal for curbless showers and other areas where water needs to be contained

• Self-adhesive design, easy to install and remove

How To Use:

• 1. Wiping off the water and dust on the ground.

• 2. Determining the position of the water retaining strip and marking it with a pen on the ground.

• 3. Remove the self-adhesive and install the water barrier in the marked position.

• 4. Seal the rubber strip at the position where the two ends of the water retaining strip are in contact with the wall.

• 5. Apply glue on both sides of the water stopper and apply evenly.

Specification:

• Material: TPE Plastic

• Size: 0.6m, 1m, 1.5m, 2m

Note: 

• Please measure your using room size, then cut it as easily as needed into the desired length.
• The glue is 50ml, it needs to be purchased separately if you need large quantities.