LCD Touch Screen Digitizer Testing Tool for iPhone 6 Plus 5.5 inch with PCB Board

• This tool is used to test the condition of the touch screen digitizer, whether it is good or bad, workable or unworkable

• LED indicators show the conditions of lcd assembly and tester power on/off

• Battery and PCB board are included for facilitating your testing

• Portable and lightweight design, easy to carry and store

• Easy operation

Operation:

• 1. Insert the included battery (charged) to power the tester

• 2. Insert the testing PCB board into the tester, then link the touch screen digitizer to the PCB board. Remember to link tightly for better testing

• 3. Press S0 button to power on the LCD display and wait 2-3 seconds

• 4. After it is well-linked and powered, if the digitizer is in good condition, clear picture will be displayed on the screen; if it is in bad condition, there will be some strips or dots on the screen

• 5. Press S1 button to check the next / previous picture

• 6. After finishing testing, press S0 button again to power off the LCD display, then take out the PCB board and touch screen digitizer